R&D, Technical Consulting and Code Review
Research and development, technical consulting, review of existing firmware and designs. NDA-based cooperation, Git flow, staged delivery.
Typical project:Firmware review + optimization· 1–3 weeks
Project
Tell us briefly about the project: what you want to build, which functions it needs, the rough timeframe. If we have done something similar we will send an example.
Research and development, prototyping, technical support, review of existing code/design. Courses and mentorship.
Not every project starts from zero. More often a team has already built something and is stuck: the device freezes at random, the battery drains sooner than expected, the board will not pass certification. In such cases an outside look turns a few weeks of searching into a few days.
The work usually takes one of three forms: a review of existing code and design, an investigation of a specific problem, or consulting on a technical decision — which platform, which protocol, which component.
The outcome is always written: what was found, why it happens, what fix is proposed and roughly what each one costs in effort. You make the decision; we provide the basis for it.
How we work
What this area covers
- Prototype development (proof-of-concept)
- Existing firmware and PCB review
- Datasheet, user manual, technical documentation
- Code review and best-practice guidance
- Group courses — STM32, Arduino, ESP32, KiCad
- Long-term technical consulting for companies
What you receive
- A written technical report — findings and causes
- A prioritised fix list with effort estimates
- Code review notes, directly in the repository
- Measurement results (power, timing, signal)
- Comparison of alternative solutions
- NDA before work starts, if required
Technologies we work with
From concept to production
- 01
Consultation and Requirements Analysis
We jointly define the project's goals, functional requirements, and budget/timeline constraints. NDA signed if needed.
- 02
Architecture and Schematic Design
System architecture, part selection, schematic drafted. Initial BOM and PCB block diagram agreed upon.
- 03
PCB Layout and Firmware
PCB design (KiCad/Altium), signal integrity, EMC checks. Firmware developed in parallel. Interim reviews.
- 04
Prototype and Testing
First PCB batch assembled and lab-tested. Validation with firmware. Required adjustments.
- 05
Production and Support
DFM optimization for mass production. Documentation, user manual, long-term technical support.
Frequently asked questions
Other engineering areas
Have an idea? Let's talk
Small prototype, medium-scale R&D, or long-term technical support — regardless of your project size, I respond within 48 hours.